2475D - Smarthome Insteon / X10 InlineLinc V2 Dimmer

The InlineLinc V2 Dimmer is perfect for lighting circuits where you don't have a wall switch controlling the load (eg. recessed kitchen lighting). The InlineLinc installs in an electrical junction box, or you can remove the screw tabs to install them in a fixture box with limited space. Now you can add control where none previously existed or add new lighting without having to run wires back to a wall switch!

The InlineLinc V2 supports both legacy X10 and the new Insteon PLC protocol for the ultimate in flexibility. It will work with incandescent, low voltage halogen and other magnetic low voltage or dimmable electronic low voltage loads. For fluorescent and other non-dimming loads, please use the 2475S.

As with most other Smarthome products, the InlineLinc is packed full of features. It supports 32 on levels, user defined ramp on and off speeds, X10 preset dim.

Hint: Make sure you record the Insteon address when installing the InlineLinc. You can use it to set up Insteon links remotely using HouseLinc Desktop, Powerhome or Indigo software. If you are performing manual set-up make sure to set it up prior to closing up the box/fixture.

Smarthome 2475D InlineLinc V2 Dimmer Features:

• X10 and Insteon compatible, including X10 scenes & preset dim
• Supports 300W incandescent lighting
  
• Do not use for fluorescent or other non-dimming loads. Instead use a 2475S in those applications.
• Supports 32 on levels if programmed locally, or 1% steps if programmed remotely.
• User programmable on level and ramp rates
• Stores settings in NVRAM so programming will NOT be lost during a power failure. Load will return to its last state when power is restored
• Dimensions: 3.75"H x 1.8"W x 1.2"D (2.75"H with screw tabs removed)
• 2 Year warranty
• ETL and CSA certified