This multi-function device allows Insteon control of heavy duty loads with its built-in normally closed relay rated at up to 220V 30A capacity. It's a perfect way to take charge of your larger appliances to save energy while at the same time improving the Insteon network. You can control this device by way of wired or wireless Insteon controllers or by using the built-in on/off/set switch.
This dual band device communicates with both wired and wireless Insteon signals and has a built-in Insteon access point. It also functions as a hard-wired phase coupler for improving wired communications in a split phase environment.
Remote on/off control of heavy duty appliances up to 220/240V 30A via Insteon
NORMALLY OPEN RELAY
Dual band product features built in wireless access point
No neutral required!
Acts as physical phase coupler/signal bridge
Manual on/off/set switch
Local load sense
Status and Load status LEDs
Indoor use only
Can be programmed with an X10 address and controlled by X10
controllers
Rated -20° C to +50° C
Dimensions: 8" x 5" x 7 3/8"
cETL approved
2 year warranty
You may also require: wire nuts, 3/4" conduit, junction box