This easy to program timer provides up to 40 ON/OFF operations per week
which can be used for 24-hour or 7-day load control. The astronomic
feature provides sunset ON and sunrise OFF settings and the auto
daylight savings adjustment means you can “set-it and forget-it”. The
independent 7-day programming provides complete flexibility for
applications where load switching differs each day of the week.
Astronomic programming can be combined with independent programs to
provide a sunset ON and timed OFF program. A factory supplied CR2
lithium battery provides up to three years of time keeping without AC
power and user program selections are stored in non-volatile memory. A
low battery indicator appears in the display when the battery requires
replacement. In addition, the display continuously shows time of day,
day of the week, timer load and the load status. The timer has an
isolated single pole single throw switch which allows the timer to
switch any load type, including PAR lamps and motor loads from 12 to 277
volts AC or 12 to 28 volts DC, within the specified ratings. A “3 wire”
design allows the timer to replace, or be used as a single-pole or
3-way (multi-way) switch.
- Switch Rating –
- Resistive (heater): 20 Amp, 120-277 VAC
- Tungsten (incandescent): 15 Amp, 120 VAC 6A 208-277VAC
- Ballast (fluorescent): 16 Amp, 120-277 VAC;
- Motor: 1 H.P., 120 VAC; 2 HP 240VAC, DC loads 12VDC, 2A 28VDC
- Events – 40 ON/OFF Events per Week
- NEUTRAL WIRE NOT REQUIRED
|