ELK-120 - Elk 4 Channel Voice & Siren Driver V2

The Elk-120 v2 voice and siren driver provides 4 channels that can be configured as 4 voice channels, or 2 siren and 2 voice channels with up to 8 minutes of total recording time. The recordings are stored in non-volatile memory that can be erased and re-recorded. The siren channels offer a choice of: classic yelp, temporal coded horn or pulsing industrial horn

The Elk-120 is very flexible with options to have the siren sounds triggered in sequence with the voice sounds, and can be set to play once only or to repeat endlessly. The optional Elk-129 computer interface may be used to program the voice channels by downloading .wav files from a PC to the Elk-120.

Elk-120 4 Channel Voice & Siren Driver V2 Features:

• 4 total channels: configurable as 4 voice or 2 voice & 2 siren
• Maximum record time of 8 minutes
• Built-in siren sounds: classic yelp, temporal coded horn or pulsing industrial horn
• Recordings are stored in non-volatile memory that can be re-recorded
• Voice channels accept momentary triggers
• One time only, or continuous voice playback
• ComboTrigger™
• built-in microphone for recording
• adjustable speaker volume and current draw
• built-in 24 watt amplifier
• Line level output jack for paging systems
• Operating voltage: 11-14 VDC
• Current draw: 0.2 to 2A depending on volume & speaker load
• Sound level: 120dB @ 1 meter, 14vdc with 1 8 ohm speaker
• Max speaker load: 4 ohm
• Size: 3"x5"x1.25" (76x127x32mm)
• Lifetime limited warranty