EZIO8SA - Simplehomenet Insteon/X10 7 In / 8 Out

The Simplehomenet EZIO8SA is an extremely versatile X10 and Insteon compatible Input/Output module. It has 8 relay outputs, 3 opto-isolated 3-30VDC voltage inputs, 2 general purpose analog/digital 0-5VDC inputs and one Dallas one-wire connection for a DS18B20 temperature sensor. The output relays offer both normally open (NO) and normally closed (NC) connections.

The EZIO8SA inputs can be set up to trigger another Insteon or X10 device off or on depending on input state. The free Windows configuration software from Simplehomenet will let you set a trigger level for the analog inputs as well as a trigger point for the one-wire temperature sensor.

The output relays are rated at 3A 24VDC/120VAC and can be triggered by an external Insteon or X10 command.

Please note:  The EZIO8SA is pictured with the 2412S PLM which is required.  If you do not already have the PLM please select it in the options above before you add it to your cart.

Simplehomenet EZIO8SA X10/Insteon Input/Output Module Features:

• Easy to set up and configure
• Can run standalone after using the Windows configuration utility, or can be part of a home automation system
• Four opto-isolated inputs 2-30VDC
• Two 0-5VDC inputs configurable as analog (0-1023 counts) or digital
• One one-wire input for Dallas DS18B20 temperature sensor
• 8 outputs with Form C relays (both normally open and normally closed contacts available
• Inputs can trigger X10 or Insteon commands
• Outputs can be triggered by X10 or Insteon commands
• Requires Smarthome powerline modem
• 1 year manufacturer's warranty
• ETL Listed, CSA certified