Flair HIGH SECURITY BALANCED MAGNETIC CONTACTS come with Flair's time tested balanced magnetic switches and adjustable magnets. Installation is easy and the higher level of security is unbeatable at a reasonable price. Our 3/8", 3/4" and 1" recessed models are the smallest high security contacts in the industry.
The Flair MSS200-7
Balanced Magnetic Contact utilizes two high reliability
Rhodium plated reed switches of different sensitivity
encapsulated in epoxy inside a recessed mounted fire
retardant case. When the rare earth magnet is in place
and properly adjusted, one switch will be open and the
other will be closed. This normal configuration will change
should one of the following occur; (1) the normally closed
switch will open by either the deliberate shunting of the
magnetic field or if the door/window is opened, (2) the
addition of a magnetic field of the same polarity as the
contact magnet will cause the normally open switch to
close, and (3) the addition of a magnetic field of opposite
polarity as the contact magnet will cause the normally
closed switch to open.
An end-of-line resistor may be used to allow a pre-deter-
mined trickle of current to flow and permit operation from
a supervised line at all times. A change in current when
the switch closes causes a signal to activate the alarm.
See Installation Instructions for more information. Features:
- 3/4" Dia. x .90" Long
- White
- Balanced Magnetic Switch
- UL Approved
- 12" Wire Leads
- 1/8" to 1/2" Gap, Adjustable Magnet
- Lifetime warranty
|