T1100RF - Venstar Wireless Thermostat for T1100 Kit

Add up to 4 x T100RF Venstar wireless thermostat transmitters to the T1100REC receiver and you can control your heating/cooling system from any room without running any new wires. The wireless transmitters run on 2 AA batteries and feature 7 day programming with up to 4 periods per day or they can be manually operated.

Auto Changeover, 2-Stage Heat & 2-Stage Cool for use with gas / electric or heat pump systems.
Thermostat is completely wireless, receiver can be mounted at unit or at old thermostat's location.
Transmits at 418MHz using pulse code modulation — won't interfere with other wireless systems
Sender uses two AA batteries (included)
7 Day Programmable with 4 time periods per day, copy command and holiday mode
Dual-set point with adjustable dead band (1 to 6 degrees) and temperature sensor calibration.
All programming stored in nonvolatile memory.
Thermoglow Electro-luminous Display.
Display shows heat and cool set points, mode, and room temperature simultaneously.
5 minute compressor time guard and adjustable cycle limit, both can be overridden for servicing equipment
Set point adjustment range from 35° to 99° F, sensing range from 32° to 99° F.
64 house codes allow installation of up to 64 systems within transmit range with no interference.

Note: Commands and will only be accepted from one location at a time, based on the transmitter whose button was last pressed. Only the transmitter set as unit 1 can be programmed with a schedule, and it will overide the other Venstar wireless thermostat senders when the next time event occurs.