Azco HDMI and IR Over Single CAT5E / CAT6 Extender
- Product Information
This HDMI Extender is based on HDBaseT technology. Using one CAT5e/6 cable, it extends your HD display with resolutions of 1080p/60Hz up to 100m (330ft) away from the HDMI or DVI-D source. It can also extend Ethernet and provide an IR back channel to control AV sources, using the same cable. There are three Ethernet ports on both the sender and the receiver that are connected to standard network devices such as 100Base-T routers and hubs. The Built-in IR extender function allows you to control Source devices via IR remote from the remote viewing location by sending IR commands received at the display back to the source devices. This unit supports HDCP and uncompressed HDMI signals and also enables HDMI10.2 Gbps and 100 Mbps Ethernet in parallel over the single CAT5e/6 cable. It supports a total bandwidth of 10.2 Gbps, at 340MHz/3.4 Gbps per channel. It provides support for 1080p@60Hz@48bit pixels, 3D pass through, CEC pass through, uncompressed audio such as LPCM and compressed audio such as DTS Digital, Dolby Digital, DTS-HD and Dolby True HD. Each unit has 3 standard Ethernet ports with switching capabilities. All 3 are identical and any type of connection topology is permitted. The cable is IEEE-568B standard.
Customers Who Bought This Also Bought