Fortrezz MimoLite Zwave Garage Door Kit With Door Sensor
- Product Information
Add garage door control and monitoring to your Zwave automation system. With an Internet enabled system like VERA, Hometroller or Homeseer you will be able to know if the garage door has been left open, remotely shut it from anywhere, or set up email alerts when it is opened.
The MimoLite output will be connected in parallel to the garage door button that operates your opener, typically right near the opener. The included overhead door sensor attaches to the garage door to provide status.
As an alternative, we are also carring the Linear Zwave garage door opener kit, please see part# GD00Z-5 on our site.
1 x MimoLite Zwave IO module
1 x Garage Door Sensor
20 Feet of Wire
Note: To test compatibility with your garage door opener, use a small wire to quickly 'short' the two leads coming from the GDO to the door button. If that opens/closes the door then you're set. If not you'll need to be more creative, so reach out and we'll explain.
For safety, this type of system should only be used with Garage doors that have an electric eye to detect objects blocking the door, and an auto-reverse mechanism. You can confirm if the garage door kit will control your door by quickly shorting the two terminals that connect to your button. If it opens, stops and closes the door, this kit is for you! Don't forget to remove Jumper P5