DSC 2 Way Wireless Transceiver Module For Powerseries V4.6+
- Product Information
The TR5164-433 wireless transceiver breaks the wired barrier and allows new DSC Powerseries alarm systems to support wireless sensors, keyfobs and most notably the new WT5500 fully wireless keypads.
Both 1 way and 2 way wireless sensors are supported.
Adds support for 1 and 2 way wireless fobs, sensors and keypads
- Up to 4 WT5500 wireless keypads supported
- Supports 60 wireless zones
- Supports 16 wireless keys
- 8 partition support for 1 way keys
- case tamper
- Easy enrollment process with WT5500 keypads
- 3 Status LEDs
- Requires Powerseries Firmware 4.6 or higher
- Current Draw 60mA
- Frequency 433 MHZ
- Can be up to 230m / 750 feet from main panel using 22 guage wire
- Operating temperature 0-49 Celcius (32-122F)
The TR5164 is compatible with PC1616, PC1832, PC1864 boards with firmware revision 4.6 or higher (all of our current stock is compatible).
The TR5164 needs to be programmed by a PK5500ENG version 1.3 or higher (all our current stock) or WT5500 wireless keypad.