Simply Automated Pre-Programmed 3 Way Anywhere Switch Kit, White
- Product Information
The 3Way anywhere switch kit from Simply Automated, allows remote control of a wall switch from a second location anywhere on the same property. This solves the problem of adding adding a second switch to turn on a light at the other entrance to a room, or remotely turning on a light in a barn, out building, garage, shed or boat house.
The 3 Way kit is pre-configured to work right out of the box. Just wire one of the switches to control the original light. Then add the second switch anywhere you can get power to the switch. No traveller wiring required.
Voila, you now you can control the light from both locations.
The V3WAY is part of the Simply Automated 'Anywhere' series and can be expanded by adding additional devices including the UMC-V0 plug-in schedule timer for automated control based on times or sunrise/sunset.
- High quality professional grade switches
- Supports 120V 900W or 7.5A max load, 1W min load
- Controls almost any load
- No traveller wiring required
- NEUTRAL wire required at both switch locations
- Blue-Green status LED for off-on indication
- Thermal protection
- Additional Switches (model US1-V0) may be added to create a 4 way, 5 way, multi-way
- 4 Channels to choose from, allows for up to 4 different pairs per property
Note: Both switches require NEUTRAL and Hot connection. Uses advanced powerline technology which is very strong - it can carry a signal for up to 1000 feet normally, or 1 mile on 14 guage copper. But both switches need to be able to communicate over the powerline so best to have them on the same electrical phase if possible. In a residential installation, the signal can normally travel across phases. In a commercial 3 phase environment they must be on the same phase. These DO NOT work with regular UPB switches and transmitters - they are designed for standalone use.