INSTEON Dual Band SwitchLinc On/Off Switch White
- Product Information
Insteon switches are beautifully designed, reliable and can be used on their own, with other Insteon devices for remote control, or as part of a larger automation system for full featured automation. They are designed to be used in new construction or retrofit applications and can be part of elegant single room or whole house lighting scenes.
On/Off switches are appropriate for use where dimming is not possible or required, and can support lighting, fans, motors and ballasts to their maximum rating (below).
- Dual Band INSTEON support - Powerline and RF communication
- Doubles as wireless access point & INSTEON repeater
- Can be directly controlled by wired or wireless INSTEON transmitters
- True rocker action - top on, bottom off
Dual Band INSTEON technology, uses both powerline (house wiring) and wireless INSTEON communication simultaneously for the best possible communication reliability. The dimmer can be directly controlled by any other Insteon transmitter including other Insteon switches or keypads, as well as RF only devices such as the RemoteLinc2, making it perfect for standalone home theatre lighting, bedroom lighting, or as part of a larger INSTEON network.
For a 3 Way, 4 Way or Multi-Way situation, install one 2477S or an Insteon Keypad controlling the load(light), then install additional 2477S units as needed simply giving them power and then create an INSTEON link back and forth between units. Using this technique you can create 3 way switching anywhere in the house even if it was never wired for it!
Smarthome 2477S SwitchLinc INSTEON Dual Band On/Off Switch Features:
- Dual Band support of INSTEON powerline and RF wireless communication
- Built-in wireless access point / repeater
- True rocker action - top for on, bottom for off
- Individual setting for ON level for local operation and each scene
- Supports INSTEON only. X10 no longer supported.
- Supports lighting, fans, motors
- Operating voltage 100-277VAC, 50/60 Hz automatic selecting
- Load capacity: 17A resistive, 1800W incandescent, 10A ballast, 1HP motor (motor 120V only)
- Neutral Wire Required
- Dimensions: 4.1" H x 1.78" W x 1.47" D
- 2 Year Warranty
- cETL certified, confirms to CSA standards
- Does not include trim plate. Insteon Screwless Plates or Leviton Srewless Plates available or use with standard Decora style plates.