Econet Zwave Motorized Controller For Water Shut Off Valves
- Product Information
The EBV105 offers a cost-effective way to control your water valve using Z-Wave. Designed to work with your new or existing water shutoff valve, the EBV105 simply attaches to the pipe and ball valve handle. Add a Z-Wave automation controller and water sensor(s) and you have a complete flood protection package.
The EBV105 ships with a new and improved universal mounting kit that allows it to work with 1/2", 3/4" and 1" water valves.
This water valve controller, is Z-Wave Plus certified to allow compatibility with most Z-Wave certified automation controllers such as Vera, SmartThings, Zipatile, Hometroller, etc. allowing for powerful automation that can shut off the water when you arm your alarm to Away Mode or in case of a water leak. Z-Wave Plus also means an improved wireless range as well as an improved response time due to an increased bandwidth.
The ingenious design means you can add Z-Wave control to an existing valve, or have your plumber put in a standard valve and you can add Z-Wave control anytime. Plus, if you move you can take it with you!
Note: Ball valve is NOT included. This device attaches to a standard ball valve with a handle as shown in the images. This model is designed to work with 1/2", 3/4", 1" pipes/valves. Make sure your valve is moving smoothly by hand otherwise it's time to replace the valve first.
** This listing as of 11/14/2017 is for part# EBV105-HCM which includes a new mounting kit.**
Econet EBV105 Z-Wave Motorized Controller for Water Shut Off Valves Features:
- Designed to attach to standard 1/2" or 3/4" or 1" ball valves as shown on product page
- Let your plumber handle plumbing and you add control
- Easy installation and removal
- Operates on Z-Wave Plus 908MHz frequency
- Manual open/close toggle on motor
- Valve Pressure: 1.6Mpa
- Open/Close time approx 5-10 seconds
- Torque: 30~60 kg.cm
- Voltage: 12V DC/A1